How to install the magnetic contact?
Thank you for purchasing our magnetic contact, we herein magnetic contacts installation instruction.
Surface mount magnetic installation method:
- The switch side with cable fixes on the door frames; and the magnetic side fixes on the moving door, normally on top with screws.
- When installing, the switch side and magnetic side should be parallel matching, otherwise the operation distance will be effected.
- The gap (or distance) between the switch and magnetic should be as small as possible; when the distance is larger than the operation distance, the product will not work.
- If the magnetic side fixes on the iron door or near some magnetic metal, magnetic contact's operation distance will decrease greatly. The wooden door magnetic contact are not suitable for iron door.
Embedded magnetic contact installation method:
- The switch side with cable fixes on the iron door frames, the magnetic side fixes on the moving door, normally on the side or top position, drilling installation.
- When installing, the switch side and magnetic side should be parallel matching, otherwise the operation distance will be affected.
- The Iron door will decrease the contact's magnetic force, iron door magnetic contacts with at least 25mm operation distance is recommended.
![Roller shutter magnetic contact](/images/278_001.jpg)
Roller shutter magnetic contact installation:
- The switch side with cable fixes above or under the ground, the magnetic side fixes underneath of the moving door with screws.
- When installing, the switch side and magnetic side should be parallel matching, otherwise the working distance will be affected.
- The distance between the switch and magnetic should be as small as possible, when the distance is larger than the operation distance, the product will not work.
- If the roller shutter gas is larger, L-shaped bracket is recommended to adjust the operation distance.