Modern, upgraded 4-channel selectable frequencies photoelectric beam detectors that most professional installers prefer.
Photoelectric beam perimeter protection offers the most reliable and cost effective method of protecting critical infrastructure and valuable property.
Both transmitter and receiver have tamper-proof design
Great pet-immunity ensuring low false alarm rate
Including surge/lightning protection circuit design
Self-check function to auto detect malfunction of product
ABS environment friendly engineering plastic material housing make it highly durable and can withstand vandalism,extremely durable can withstand high temperature, anti-UV paint coat to against strong light interference.
Sophisiticated optic lens system can greatly filter white light, the product can avoid being interfered by strong sun light or car head light.
Dual layer optic lens structure allows users to rotate 180 degree horizontally, ±10 degree vertical, super easy to get best installation angle under variety circumstances.
New photoelectric beam detectors use LED segment display to show signal strength, which is more convenient. 0-4 means weak signal, 5-6 means normal, 7-8 presents good, 9 presents excellent.
New photoelectric beam detectors support 4-channel frequencies selectable to avoid crosstalk interference, it also adopts smart auto gain control (AGC) to increase IR power when encountering bad weather, or reduce IR power in fine weather condition. This design can effectively extend expectancy of product, also reduce power consumption while providing reliable performance.
ABT series dual-beam photoelectric detectors are designed to detect burglars and activate a hardwired alarm control panel when both the upper and lower invisible infrared beams are simultaneously broken. ABT product portfolio including ABT-50M, ABT-60M, ABT-80M, ABT-100M; that depend on the distance and coverage areas. Maximum detection range between receiver and transmitter for the ABT-100M is 100m, ABT-80M is 80m, ABT-50M is 50m.
Minimum cost, minimum false alarm, light weight; Works with various types of security systems including access control, alarm panel, IP video surveillance;Selectable beam frequencies to eliminate crosstalk interference, crosstalk occurs when staking beams or for long range applications;Detectors can connect PTC resistor for heating to defrost and make the air dry and eliminates the moisture; AGC control as environmental compensation design to automatically adjust IR intensity (power), it’s designed to reduce false alarms caused by snow fog, heavy rain, ice and misalignment; will activate alarms when cover is removed; Alignment level monitor with digital LED segment display, super easy to obtain the best optical alignment; Allowing users to adjust beam interruption time for any environment; Anti-frost structure can prevents fog and condensation from blocking the beams; IP65 weaterproof design better to meet outdoor installation requirements.
We provide you high quality and reliable security products.
Model | ABT-30M | ABT-60M | ABT-80M | ABT-100M | N/A |
---|---|---|---|---|---|
Outdoor range | 30m | 60m | 80m | 100m | 150m |
Indoor range | 60m | 120m | 160m | 200m | 300m |
Detection method | Infrared beam interruption detection | ||||
Beam frequency selection | 4 channel | ||||
Interruption period | Variable between 50, 100, 250, 500 msec (4 steps) | ||||
Power source/input | DC10-24V | ||||
Alarm output | Relay output 1C, DC30V 0.5A max | ||||
Alarm Period | 2 sec (±1) nominal | ||||
Tamper output | Normal close, activates when cover removed. | ||||
Ingress protection | IP65 | ||||
Operating temperature | -20°C – +60°C (-4°F – +140°F) | ||||
Alignment angle | ±90° Horizontal, ±10° Vertical | ||||
Mounting | Indoor/Outdoor, Wall/Pole/Beam Enclosure Mounting | ||||
Weight | 900g |
Save thousands in security equipment, no monitoring fee, no-obligation contract!
Copyright © 2009 - 2023 Unifore. All rights reserved.